Home > Scooter Lifts >

Trilift Scooter & Powerchair Lift
Trilift Ultra Lite Scooter Lift
 



List Price: $2,199.00
Our Price: $1,790.00



In Stock: Usually Ships in 24 Hours

Trilift Model

Ultra Lite for Travel Scooters or Power Chairs (Under 145 lbs) (Any Class Hitch)
Standard for Scooters (Up to 250 lbs) (Class 2 or 3 Hitch) [Add $190.00]
Standard for Power Chairs (Up to 250 lbs) (Class 2 or 3 Hitch) [Add $370.00]
Heavy Duty for Scooters & Powerchairs (Up to 450 lbs) (Only Class 3 Hitch) [Add $500.00]
Tilt Adaptor for Hatch Access

Tilt Adaptor for Up to 270 lbs Scooter /PC [Add $320.00]

Tilt Adaptor For Over 270 lbs Scooter/PC [Add $395.00]
Included Free

Docking Bracket Device

Manual Crank

Silent Hitch Pin
Hitch Class?

Class 3 Hitch (2" x 2")
Class 2 Hitch (1.25" x 1.25")
Trilift Options

4 inch L Adaptor Extension [Add $38.00]

Silent Hitch Pin LOCK [Add $19.00]

Relocation License Plate [Add $109.00]

Wiring Installation Kit [Add $49.00]

7 Pin Car End [Add $9.50]

Remote Control [Add $300.00]

Custom Bracket [Add $400.00]

 

Trilift Scooter & Powerchair Lift

The Tri Lift is an great new easy way to carry your scooter or power chair. Its innovative design doesn't require any bulky ugly platform on the back on your car, truck or van so you longer have the added weight and eye sore of a conventional outside platform lift.

The Tri Lift comes in 4 different models:

1) Ultra Tri Lift for travel scooters or lightweight power chairs up to 145 lbs (like the Pride Go Chair)
2) Standard Tri Lift for Scooters up to 250 lbs (Class 2 or 3 Hitch)
3) Standard Tri Lift for Power Chairs up to 250 lbs (Class 2 or 3 Hitch)
4) Heavy Duty for Scooters or Power Chairs up to 450 lbs. (Only Class 3 Hitch)

It is incredibly sleek and lightweight, weighing only between 42 and 60 lbs. The loading capacity on the standard models is up to 500 pounds. The lift offers many options including a 4 position tilt adapter (allowing hatch access), a remote control, a lighted license plate holder, and a soft cover. The Ultra Lite uses a Class II hitch and is wired in through the auxiliary power wiring in your car, SUV or van for easy power. The Standard models require a class 3 hitch and will also work with almost any vehicle on the road. If you looking for a convenient, lightweight, easy to use lift that doesn't take up too much space, the Tri Lift is the answer.

How Does the TriLift Work?: The lift works by having a "lifting bracket" or docking bracking bolt onto your scooter or power chair. The docking bracket then attaches to the hitch, lifting your scooter or power chair with the push of a button. The scooter or power chair lifts off the ground without the need for any ugly heavy platform andproviding great ground clearance.

Can the TriLift work for me? Please call us at 1-866-230-2323 if you would like to speak with a Tri Lift expert. We're happy to discuss if the Tri Lift would work for you.


TRILIFT ADVANTAGE:


NO STRAPS
ADJUSTABLE
EASY TO LOAD
MORE GROUND CLEARANCE
NO BULKY PLATFORM
FITS MOST VEHICLES


With our unique patented design, TRILIFT will simplify the way you transport your scooter or power chair without impairing the look of your vehicle.

OPTIONS:

  • 4 Position Tilt Adaptor with Spring Load - Gives you access to hatch or rear door.
  • External Coil-Cord Remote Control
  • Silent Hitch Pin Lock
  • Lighted License Plate Holder - Relocates your license plate so the lift is not blocking it and it's easily visible.
  • Soft Cover for Power Head

WARRANTY:

Three Years Transferable Limited Factory Warranty on Parts.

STANDARD TRILIFT


Lift Height 45"-60"
Loading Capacity Up to 500 lbs
Lift Weight
60 lbs
Back Space 11"
Cycle Load Time 55 seconds
Docking Bracket Size 9.5"
Docking Bracket Weight 12-22 lbs

STANDARD ULTRA-LITE

Lift Height 42"-55"
Lift Weight 42 lbs
Loading Capacity Up to 145 lbs
Back Space 10"
Cycle Load Time 45 Seconds
Docking Bracket Size
7"
Docking Bracket Weight 8-15 lbs

FAQ's

How does the TRILIFT connect to my vehicle and what are the requirements?
TRILIFT fits most vehicles. The following standard towing equipment is required on your vehicle:
Class 2 for ULTRA LITE and class 3 for standard trilift, 7 way trailer connector, Auxiliary power wiring


How does the docking bracket attached to the scooter?
The docking bracket bolts to the scooter / power wheelchair frame and typically utilizes u-bolts or u-clamps for attachment. Most application required no drilling.

What keeps my scooter locked on and prevents it from bouncing off?
With a touch of a button our patented triangular interlocking system double locks your scooter or power wheelchair in the uplifted position by wedging the docking bracket triangle into a specially designed lock bracket that is welded to the post of the lift. No cumbersome straps or clamps to mess with.

Will I be able to open the rear door of my vehicle once TRILIFT is installed?
Yes, a tilt option is available for most SUV's & Vans and trucks.

Can I load my scooter / power chair in my garage and still have enough clearance to back out into the street?
TRILIFT carries your scooter / power chair with significantly more ground clearance than all others lifts and in most instances can be loaded in your garage or driveway.

How much does the trilift weight?
I have a smaller vehicle and i am concerned about the weight. TRILIFT weighs about 1/2 as much as all other outside lifts, the standard TRILIFT weighs 65 lb. & the new TRILIFT ULTRA LITE weights under 40 lb.



N/A


Search For Products

Get Special Offers & Promotions

Secure & Reliable On-Line Shopping

Security Verified Seal
Volusion SSl
Privacy Pledge

Follow us on:

Facebook Twitter Google Plus

GoMobility Proudly Accepts

Credit Cards

Copyright ©  Go Mobility Scooters.

Back to Top