2010 Stand-N-Ride 2 Scooter

Are you less than 5'6" tall? Do you need a pre-mobility standing or sitting scooter for a child? Then the EV Rider Stand-N-Ride 2 Scooter was designed especially for you. This extra stable three wheeled standing scooter gives you the little bit of extra help you need to get through your day. You can then disassemble your scooter in less than 30 seconds to take it anywhere you need to go. There's a cup holder for your comfort, too. And yes, the EV Rider Stand-N-Ride 2 even goes in reverse, so it's got top notch maneuverability to help you tackle your whole day. Contact us, toll free, about the EV Rider Stand-N-Ride 2 scooter today and find out if this is the best option for you.

GO Tip: The SNR2 was specifically designed with a lower center of gravity for people who wish to use the scooter exclusively for sitting OR for people who are 5'6" or under and wish to use the scooter for sitting and standing.

If you are taller than 5'6", click here to see the Stand-N-Ride scooter

Note: If the SNR is being shipped to NY state or internationally it will not come fully assembled. However, the SNR is very easy to put together.

Features:

• Two speed switch, Low - 7.5 mph or High - 15 mph top speed
• Forward and reverse mode
• Included Charger and Batteries
• Powerful 500 Watt Motor, 220 lbs capability (with mobility seat)
• Convenient, easy to remove and charge battery pack
• Optional seat can be installed easily in the field
• 15-20 miles range on a fully charged battery
• Easily comes apart without any tools
• Over-sized detachable basket
• Non-marking and optional flat-free tires
• LED headlight and horn
• Built-in cup holder
• Disc Brakes
• Free elegant safety helmet

Specifications

Motor:	500 Watt High Torque BLDC Integrated Hub Motor
Speed:	Variable with 2 Max Speeds Low: Up to 7.5 mph High: Up to 15 mph*
Battery Charge (Range):	15-20 miles per charge
Charger:	Input 2A x AC 100V ~ 240V (automatic switch)
Charger:	2 Amp- OffBoard
Charging Time	4-6 hrs
Dimensions:	36.3"L x 25.3"W
Height:	42" Maximum - 36" Minimum
Tire Size:	12.5" x 2.25"
Handlebar & Tiller Height:	Adjustable
Ground Clearance:	2.75 inches
Deck Height:	7"
Turning Radius:	22"
Battery:	2 X 12V / 18AH (24v) Sealed Lead Acid Battery (batteries readily available)
Carrying Capacity:	220 lbs with Mobility Seat / 300 lbs Stand Up version
Component Weights: Tiller:	38 lbs
Base:	38 lbs
Battery Pack:	31 lbs
Seat Assembly:	8.5 lbs
Basket:	4 lbs
Total Weight:	Including Seat with batteries: 120 lbs
Seat Dimensions:	Mobility Style: 16"W x 14"D X 14"H
Color:	Black

Documents
Owner's Manual
Product Demo

SIX MONTHS LIMITED WARRANTY

From one (6) Months from the date of purchase, if any part or electronic componentof the Scooter is found upon examination to be defective in material and/or workmanship, it will be repaired or replaced, at EV Rider’s option, without charge.

Warranty labor charges are NOT included. The purchaser is responsible for the delivery to the authorized repair facility. Satisfactory proof of purchase,serial number and the date of purchase are always required. For warranty service, please contact the retail establishment from whom you purchased your EV Rider product.

Go Mobility 30 Day Return Policy

This item is covered by our Go Mobility 30-Day Return Policy. As stated in our full Return Policy, this item may be returned within 30 days of receipt for a full refund of purchase price minus the shipping and a 15% restocking fee.

The following conditions must be met:

• The item must be in new condition – no cracks, scratches, etc. - with original packaging and all parts and accessories.
• A Return Authorization must be requested from Go Mobility within 30 days of delivery.

Once the Return Authorization has been received from Go Mobility, the product must be returned within 14 days to receive your refund. You can expect a refund in the same form of payment originally used for purchase usually within 3-5 business days of our receiving and inspecting your returned product.

Please see below for reviews.